Eversolo Introduces DAC-R8: A New Approach to Discrete R2R Conversion

•

High-end DAC design is about more than selecting a conversion chip. Discrete R2R remains a compelling approach in high-end digital audio, allowing manufacturers to shape the conversion process through precision resistor networks and dedicated digital control. This flexibility also brings significant engineering challenges. Resistor matching, temperature stability and switching precision all demand careful attention, while developing an R2R architecture from the ground up calls for expertise spanning digital processing, clock management and analog circuit design.

With the upcoming DAC-R8, Eversolo brings these elements together in its newly developed OriginR2R™ architecture, taking direct control of the core conversion process.

Priced at $1,280, the upcoming DAC-R8 features Eversolo’s proprietary OriginR2R™ conversion architecture and fully balanced R2R analog volume control.


OriginR2R™: Control Across the Entire Conversion Process

The DAC-R8 employs Eversolo’s proprietary OriginR2R fully differential DAC architecture. At its heart is a 5+20-bit segmented design, combining a 5-bit coarse section and a 20-bit fine section to address conversion accuracy and linearity.

DSD512 / PCM 768kHz 32bit Conversion Architecture

An FPGA serves as the central digital processing and control unit, coordinating digital filtering and signal timing to ensure precise synchronization between the resistor network and its control logic. The DAC-R8 takes a format-specific approach to conversion. Although PCM and DSD share the same high-precision resistor network, each follows its own native conversion architecture.

PCM signals are decoded through a segmented 5+20-bit resistor network, while DSD signals benefit from a dedicated 1-bit native direct-conversion path, avoiding conversion to PCM before digital-to-analogue conversion.

The DAC-R8 supports native decoding of up to PCM 768kHz/32bit and DSD512.

This is the foundation of Eversolo’s proprietary R2R technology, bringing the entire conversion process under the precise control of Eversolo’s engineering team.

R2R Conversion Meets R2R Analogue Volume Control

The conversion network is supported by an in-house 10MHz oven-controlled crystal oscillator (OCXO) and a custom O-core linear power supply, providing a stable foundation for clock generation and power delivery.

The DAC-R8 extends its R2R approach to volume control, incorporating a fully balanced, stepped R2R analogue volume control system. A relay-switched precision resistor network adjusts the analogue output level in discrete steps.

Digital attenuation may reduce effective signal resolution at lower listening levels, while conventional potentiometers may introduce channel imbalance and mechanical wear. The DAC-R8’s resistor-based analogue approach is designed to preserve low-level detail and maintain accurate channel matching as volume is reduced.

This dual-R2R configuration combines discrete conversion and precision analogue attenuation in a single DAC and preamplifier. It can connect directly to a suitable power amplifier or active loudspeakers, allowing a system to operate without a separate preamplifier.

Precision with Room for Personal Preference

The DAC-R8 offers three processing modes to suit different listening preferences:

  • NOS (Non-Oversampling): Playback without oversampling
  • OS (Oversampling): Selectable 2×, 4× or 8× oversampling
  • BEST: An optimised processing mode

A browser-based audio control interface provides additional adjustment options. Connect the DAC-R8 to a computer via USB and open the web interface to access equalisation, filtering, dynamics processing and delay settings, without installing an additional driver.

Independent left- and right-channel adjustment offers further flexibility for tailoring playback to different music and listening environments.

Built for Modern Hi-Fi Systems

The DAC-R8 offers a comprehensive selection of digital inputs. AES/EBU and coaxial inputs feature electrical isolation to help reduce ground-borne noise and interference from connected source equipment.

USB Audio, I²S, optical and ARC/eARC connections provide additional options for computers, televisions and digital transports. The DAC-R8 supports audio formats up to DSD512 and PCM 768kHz /32bit.

A 5.2-inch IPS display provides an intuitive front-panel interface, with dynamic spectrum analyser and VU meter displays.

The DAC-R8 also complements the Eversolo T8 streaming transport in both dimensions and industrial design. The T8 handles digital music access and transport, while the DAC-R8 takes care of digital-to-analogue conversion and analogue output. Together, they form a complementary digital source system with clearly defined roles.

Eversolo’s Approach to High-End Conversion

The DAC-R8 reflects Eversolo’s approach to high-end digital audio: developing core architectures in-house and integrating precision resistor networks, digital algorithms, clocking and analogue circuitry into a coordinated system. This development is supported by a dedicated R&D team representing more than 40% of Eversolo’s workforce, reflecting the company’s long-term investment in core audio technologies and engineering.

The forthcoming DAC-R8 brings this work together through its proprietary OriginR2R™ architecture, fully balanced analogue volume control and extensive system integration.

The Eversolo DAC-R8 will launch soon. Further product information and availability details will be announced through Eversolo’s official channels.

•

Share via
Copy link